Rose Petal Ribbed Dress Crochet Pattern

Looking for a stunning handmade dress that combines elegance with wearability? This Rose Petal Ribbed Dress delivers exactly that. With its fitted bodice, softly flared skirt, and beautiful ribbed texture throughout, this design makes a gorgeous addition to any wardrobe.

Woman wearing handmade dusty pink crochet dress featuring vertical ribbing pattern and romantic rose applique on left shoulder

The pattern uses a top-down raglan construction, which means you can try it on as you go and adjust the fit before committing to the skirt. The ribbed fabric created by front-post and back-post double crochet stitches gives the dress structure and a lovely vertical drape. A delicate five-petal rose flower at the left shoulder adds the perfect finishing touch.

Whether you’re making this for a special occasion, a summer gathering, or simply because you deserve something beautiful in your closet, this dress works up into a truly impressive piece. The knee-length silhouette with cap sleeves flatters many body types, and the dusty rose color is timelessly romantic.

About This Design

This crochet dress features a broad scoop neckline, short cap sleeves, and a knee-length softly flared skirt. The construction starts at the neck and works downward through a shaped yoke, then separates for the sleeves before continuing into a fitted bodice. The skirt flares gradually from the waist to create that beautiful A-line silhouette you see in the finished piece.

The ribbed texture is achieved through a simple four-stitch repeat using front-post double crochet (FPdc) stitches. This technique creates raised vertical lines that run the entire length of the garment, giving it structure and visual interest without complicated stitch patterns.

Skill level: Intermediate. You should be comfortable with basic crochet stitches, working in the round, increasing and decreasing, and post stitches.

Finished Measurements

This pattern is written for one adult sample size with the following finished dimensions:

  • Bust: 92 cm (fits 84-88 cm bust with 4-8 cm positive ease)
  • Waist: 80 cm
  • Neck to waist: 40 cm
  • Waist to hem: 50 cm plus edging
  • Upper sleeve circumference: 33 cm

Important: This is one measured sample size, not a graded size range. Compare the finished waist measurement of 80 cm with your own waist before starting. The pattern includes guidance for width adjustments if needed.

Materials and Tools

Yarn:

  • Sport weight / category 2 cotton or cotton blend, approximately 300 m per 100 g
  • Dusty rose: 850 g / approximately 2550 m
  • Buy an extra 15-20% for altered length or a denser swatch

Hooks:

  • Main hook: 3.5 mm (or size needed for gauge)
  • Edging hook: 3.0 mm (or size needed for gauge)

Notions:

  • Tapestry needle
  • Scissors
  • Measuring tape
  • 12 locking stitch markers
  • Blocking mat and pins
  • Matching strong sewing thread and needle

Optional additions:

  • For beaded versions: 25-35 smooth 4 mm sew-on ivory pearls
  • For keyhole version: one 8 mm button
  • Optional separate opaque slip, according to your yarn coverage

Gauge

Getting gauge right is essential for a garment that fits properly. Take the time to swatch before starting.

Blocked main fabric: 20 stitch positions and 12 rows/rounds equals 10 x 10 cm with the main hook.

A chain-space position counts as one position in the mesh yoke. Ribbing is measured relaxed, not pulled sideways.

How to make your swatch:

  1. Chain 35
  2. Double crochet (dc) in third chain from hook and in each chain across (33 dc)
  3. Work 20 more rows in the bodice stitch, with chain 2 to turn
  4. Wash and dry flat
  5. Measure the central 10 cm away from edges
  6. Change hook size and repeat until both stitch and row gauge are close

Abbreviations and Special Stitches

  • ch = chain
  • sl st = slip stitch
  • sc = single crochet
  • hdc = half double crochet
  • dc = double crochet (yarn over, insert hook, pull up loop, yarn over and draw through 2 loops twice)
  • FPdc = front-post double crochet
  • BPdc = back-post double crochet
  • BLO = back loop only
  • st(s) = stitch(es)
  • sp(s) = space(s)
  • RS/WS = right side/wrong side
  • rnd = round
  • rep = repeat
  • inc = increase
  • dec = decrease

Special Stitch Definitions

FPdc (front-post double crochet): Yarn over, insert the hook around the post from the front, pull up a loop, finish as dc. Do not also crochet into the top loops of that same stitch.

BPdc (back-post double crochet): Yarn over, insert the hook around the post from the back, pull up a loop, finish as dc. Do not also crochet into the top loops of that same stitch.

dc2tog (double crochet two together): Work a partial dc in each of the next 2 sts, leaving the last loop of each on the hook. Yarn over and draw through all 3 loops. This consumes 2 sts and produces 1 st.

sc2tog: Uses the same principle as dc2tog without the initial yarn overs.

Rib fabric: In RS rows or unturned rounds, repeat [FPdc in next st, dc in next 3 sts]. On a WS row, use BPdc in place of FPdc to keep the rib on the RS. Preserve existing rib posts at a shaping edge. Use ordinary dc in any new stitch until the next full repeat can be established.

Picot: Ch 3, sl st into the first of these 3 ch.

Shell: 5 dc into the same specified st or sp.

Pattern Notes

Before you begin, keep these important notes in mind:

  • Ch 2 at a dc row start does not count as a stitch. Work into the first stitch.
  • Ch 1 at a sc row start does not count.
  • Joined rounds end with sl st in the first actual st. Never count the join.
  • Do not turn joined rounds unless directed.
  • Mark the first stitch and move the marker each round.
  • Four ch-2 corner spaces separate the yoke segments. Corner chains are excluded from dc-position totals.
  • An increase corner is [dc, ch 2, dc] into that corner space. The two new dc belong to the adjacent segments, adding 8 positions across all four corners.
  • After the underarm split there are no corner spaces. Count underarm foundation chains as stitches on the next round.
  • Work shaping stitches as ordinary dc, then resume the established texture.
  • At each increase round, distribute the additions in plain columns. Do not double-work a rib post.
  • Written repeats in square brackets are worked exactly the stated number of times.

A note about the illustration: Gauge and finished measurements take priority over the picture. The illustration is a design guide. The written stitch route is an original interpretation of the visible features.

Construction Overview

The dress is worked in this order:

  1. Neck foundation
  2. Shaped yoke
  3. Underarm split
  4. Fitted bodice
  5. Flared skirt
  6. Sleeves
  7. Collar/neck edge and motifs
  8. Assembly and blocking

Try on over a slip after the underarm split and again at the waist.

Length and Width Adjustments

Length adjustment: Add or remove plain rounds between shaping rounds.

Width adjustment: First make the sample swatch. Each 8-stitch change adds about 4 cm circumference. Changing yoke depth affects sleeve and body counts, so record your new segment totals before continuing. Those alterations require a fresh fitting check.

Pattern Instructions

Yoke

Chain 124. Join without twisting. The round begins at the boundary between back and front.

Round 1: Ch 2, dc 44, ch 2, dc 18, ch 2, dc 44, ch 2, dc 18, ch 2, join. (124 dc; 4 corner spaces)

In each following yoke round/row, work the rib fabric across each segment and an increase corner into each of the four corner spaces. In the keyhole version, turn after Rows 2-3, finish Row 4 and join center-front edges. Turn once so RS faces out, then work unturned rounds thereafter.

Round 2: Work the established texture and 4 increase corners. (132 positions; 4 corner spaces)

Round 3: Work the established texture and 4 increase corners. (140 positions; 4 corner spaces)

Round 4: Work the established texture and 4 increase corners. (148 positions; 4 corner spaces)

Round 5: Work the established texture and 4 increase corners. (156 positions; 4 corner spaces)

Round 6: Work the established texture and 4 increase corners. (164 positions; 4 corner spaces)

Round 7: Work the established texture and 4 increase corners. (172 positions; 4 corner spaces)

Round 8: Work the established texture and 4 increase corners. (180 positions; 4 corner spaces)

Round 9: Work the established texture and 4 increase corners. (188 positions; 4 corner spaces)

Round 10: Work the established texture and 4 increase corners. (196 positions; 4 corner spaces)

Round 11: Work the established texture and 4 increase corners. (204 positions; 4 corner spaces)

Round 12: Work the established texture and 4 increase corners. (212 positions; 4 corner spaces)

Round 13: Work the established texture and 4 increase corners. (220 positions; 4 corner spaces)

Round 14: Work the established texture and 4 increase corners. (228 positions; 4 corner spaces)

Round 15: Work the established texture and 4 increase corners. (236 positions; 4 corner spaces)

Round 16: Work the established texture and 4 increase corners. (244 positions; 4 corner spaces)

Round 17: Work the established texture and 4 increase corners. (252 positions; 4 corner spaces)

Round 18: Work the established texture and 4 increase corners. (260 positions; 4 corner spaces)

Round 19: Work the established texture and 4 increase corners. (268 positions; 4 corner spaces)

Round 20: Work the established texture and 4 increase corners. (276 positions; 4 corner spaces)

Round 21: Work the established texture and 4 increase corners. (284 positions; 4 corner spaces)

Checkpoint: 84 front, 58 sleeve, 84 back, 58 sleeve positions. Yoke depth about 17.5 cm. For Website 1, the two front halves contain 42 sts each. Measure the opening and check that the yoke sits comfortably before splitting.

Underarm Split and Bodice

Rejoin yarn at the first stitch of the full front panel, immediately after a sleeve corner. Work the complete 84-st front, across the center-front join when present, ch 8, skip 58 sleeve sts. Dc across 84 back sts, ch 8, skip 58 sleeve sts. Join to the first body st. Leave the four corner spaces unworked. Do not add their chains to the body count. (184 body positions; 58 held sts per sleeve)

The split is not counted as Bodice Round 1. Work over the chains on Round 1. Mark 8 equally spaced points: 23 stitches apart in the initial 184-st round. Move these markers to keep the next decreases evenly distributed.

Bodice Round 1: Work established bodice texture in every position. (184 sts)

Bodice Round 2: Work established bodice texture in every position. (184 sts)

Bodice Round 3: Work established bodice texture in every position. (184 sts)

Bodice Round 4: Work established bodice texture in every position. (184 sts)

Bodice Round 5: Work established bodice texture in every position. (184 sts)

Bodice Round 6: [21 stitches in texture, dc2tog] 8 times. (176 sts)

Bodice Round 7: Work established bodice texture in every position. (176 sts)

Bodice Round 8: Work established bodice texture in every position. (176 sts)

Bodice Round 9: Work established bodice texture in every position. (176 sts)

Bodice Round 10: Work established bodice texture in every position. (176 sts)

Bodice Round 11: Work established bodice texture in every position. (176 sts)

Bodice Round 12: [20 stitches in texture, dc2tog] 8 times. (168 sts)

Bodice Round 13: Work established bodice texture in every position. (168 sts)

Bodice Round 14: Work established bodice texture in every position. (168 sts)

Bodice Round 15: Work established bodice texture in every position. (168 sts)

Bodice Round 16: Work established bodice texture in every position. (168 sts)

Bodice Round 17: Work established bodice texture in every position. (168 sts)

Bodice Round 18: [19 stitches in texture, dc2tog] 8 times. (160 sts)

Bodice Round 19: Work established bodice texture in every position. (160 sts)

Bodice Round 20: Work established bodice texture in every position. (160 sts)

Bodice Round 21: Work established bodice texture in every position. (160 sts)

Bodice Round 22: Work established bodice texture in every position. (160 sts)

Bodice Round 23: Work established bodice texture in every position. (160 sts)

Bodice Round 24: Work established bodice texture in every position. (160 sts)

Bodice Round 25: Work established bodice texture in every position. (160 sts)

Bodice Round 26: Work established bodice texture in every position. (160 sts)

Bodice Round 27: Work established bodice texture in every position. (160 sts)

Checkpoint: 160 sts equals 80 cm waist. Neck-to-waist length about 40 cm, before any added collar. If the fit is wrong, correct it here before adding the skirt.

Skirt

Skirt Round 1: 2 dc in every waist st, join. (320 sts)

On ordinary skirt rounds, work the established rib or basketweave texture. On each numbered increase round below, divide the old count into the 16 blocks specified. Work each block in texture with 2 dc in its last stitch. Each increase round adds 16 sts. Re-establish the texture over the new positions on the next round.

Skirt Round 8: [19 sts in texture, 2 dc in next st] 16 times. (336 sts)

Skirt Round 16: [20 sts in texture, 2 dc in next st] 16 times. (352 sts)

Skirt Round 24: [21 sts in texture, 2 dc in next st] 16 times. (368 sts)

Skirt Round 32: [22 sts in texture, 2 dc in next st] 16 times. (384 sts)

Skirt Round 40: [23 sts in texture, 2 dc in next st] 16 times. (400 sts)

Skirt Round 48: [24 sts in texture, 2 dc in next st] 16 times. (416 sts)

Skirt Round 56: [25 sts in texture, 2 dc in next st] 16 times. (432 sts)

All unlisted skirt rounds: One textured stitch in each stitch, without increases. The stitch count stays at the most recent stated total. Stop at the number below, before the hem edging.

Final Skirt Round 60: Work texture as scheduled, including an increase if this is an increase round. (432 sts)

Skirt checkpoint: 50 cm waist-to-hem before edging. The planned neck-to-hem length is approximately 90 cm, plus 1-3 cm for edging. Hold the garment upright for a few minutes to check cotton stretch before committing to the hem.

Sleeves (Make Two)

Sleeve Round 1: Join main yarn at underarm. Work 8 dc across underarm chains, then 58 stitches in texture across held sleeve sts, join. (66 sts)

Sleeve Round 2: Work rib texture evenly, join. (66 sts)

Sleeve Round 3: Work rib texture evenly, join. (66 sts)

Sleeve checkpoint: 33 cm upper circumference and approximately 2.5 cm below underarm before edging. The yoke supplies additional cap-sleeve coverage.

Assembly

You’ll need: Main-color yarn (dusty rose), 3.5 mm hook for joining gaps, tapestry needle, matching sewing thread, markers. Work with the garment RS out.

Pass 1: Close any small hole at the underarm corners with a short duplicate-stitch pass through adjacent stitch legs. Do not tighten the opening. (2 underarms closed)

Pass 2: Secure the bottom of the placket or keyhole with 3 small sewn reinforcing stitches across the join. Keep the opening above it separate. (1 reinforced opening when present)

Pass 3: Lay the garment flat and compare sleeve seams, waist and hem. Remove temporary construction markers after the checks. (2 sleeves matched)

Checkpoint: The garment hangs level, the underarms contain no gaps, and the neck/front opening remains usable. Check bust and waist circumference again. Never force a too-small neck opening over the head.

Edgings and Details

You’ll need: Main yarn and any accent color listed in Materials. 3.0 mm hook for neck/cuffs, 3.5 mm hook for motifs, tapestry needle and matching thread.

Detail plan: Five-petal rose flower at left shoulder. No beads.

Neck Round 1: Sc into each foundation stitch. Place 2 sc in each of the 4 corner-chain spaces to smooth the neckline. (132 sc total)

Neck Round 2: Sc in every sc, join or finish at the keyhole edge. (132 sc)

Hem Round: Sc in every final skirt st, join. (Same count as final skirt round)

Sleeve Edge Round (work twice): Sc in each sleeve st, join and fasten off. (66 sc per sleeve)

Five-Petal Rose Flower

Flower Round 1: Make a magic ring, ch 1, 10 sc into ring, join and close center firmly. (10 sc)

Flower Round 2: [Sl st in next sc, ch 2, 3 dc in same sc, ch 2, sl st in next sc] 5 times, join. (5 petals; 15 dc)

Optional Layer Round 3: Behind petals, [ch 4, sl st around base of next petal] 5 times. (5 back loops)

Optional Layer Round 4: [Sc, hdc, 5 dc, hdc, sc] in each back loop, fasten off. (5 larger petals; 45 sts)

Make 1 motif. Placement: Five-petal rose flower at left shoulder. Sew through the base and garment fabric with at least 6 small stitches. Keep the fabric flat.

For pearl arcs (if adding beads), position beads 1.5-2 cm apart along the neck edge and sew each bead separately with doubled thread.

Checkpoint: Edges lie flat without rippling. Buttons pass through their loops or holes. Motifs are securely sewn and do not pull the lace out of shape. Compare the detail count with this design before weaving in ends.

Finishing

You’ll need: Matching yarn tails, tapestry needle, blocking pins and mat. Main 3.5 mm hook only if a repair is needed. Use water suited to the yarn label.

Pass 1: Weave every yarn end through the WS of at least 6 stitches, reverse direction twice, and trim only after washing. (All ends secured)

Pass 2: Soak briefly in cool water with gentle detergent. Squeeze in a towel without twisting. Lay flat and pin the waist and skirt to the planned measurements. (1 blocked garment)

Pass 3: Let dry completely, remove pins and measure again. Support the heavy skirt when lifting. Do not hang wet cotton. (1 final measurement check)

Final checkpoint: Bust approximately 92 cm, waist 80 cm, skirt length 50 cm before edging. Sleeve lengths match within 0.5 cm. Record any difference and your actual yarn use before making another size.

Care Instructions

Follow the yarn label. Hand wash cool, support the weight, reshape and dry flat. Do not wring or tumble dry unless the yarn permits it. Test strong colors for bleeding before combining them with pale yarn. Remove or protect delicate beads before laundering.

Safety note: This adult garment is not a toy or a children’s pattern. Beads and buttons are small parts. Check their stitching before each wear and keep them away from babies and young children. Long belts and ties can catch, so secure them during wear. Lace needs an appropriate opaque slip for coverage.

Tips for Success

This dress is a substantial project, but breaking it into sections makes it very manageable. Here are some tips to help you along:

  1. Swatch seriously. A garment this size requires accurate gauge. The difference of half a stitch per 10 cm adds up over 90+ cm of fabric.
  2. Try it on often. The top-down construction is your friend. Try the dress on after completing the yoke and again at the waist before starting the skirt.
  3. Mark your rounds. With 60 skirt rounds, losing track is easy. Use a locking marker in the first stitch of every round.
  4. Support the weight. Cotton is heavy, especially when wet. Never hang this dress to dry or the skirt will stretch significantly.
  5. Record your numbers. If you make any adjustments, write them down. This information is invaluable if you want to make another dress later.
Close-up of elegant rose colored crocheted dress showing textured front post stitch ribbing and fitted bodice with A-line skirt

Final Thoughts on the Rose Petal Ribbed Dress Crochet Pattern

This dress is the kind of project that reminds you why you fell in love with crochet. The ribbed texture is satisfying to work, the construction is logical, and the finished piece is genuinely beautiful. The dusty rose color paired with that sweet shoulder flower creates something elegant enough for special occasions yet comfortable enough for everyday wear.

Thank you so much for choosing this pattern. If you make this Rose Petal Ribbed Dress, please share your photos on Instagram or Facebook. Seeing your finished projects is always a joy.

If you loved this pattern, save it to your Pinterest boards so you can find it whenever inspiration strikes. And if you do make this dress, leave a comment below. Your fellow crafters would love to hear how it turned out for you!

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

*