Blush Petal Lace Dress Crochet Pattern

I don’t know about you, but I’ve always had a soft spot for crochet garments that feel like an event. The kind of piece you slip on and suddenly feel like you’re starring in your own romantic comedy montage.

Dusty pink A-line crochet lace dress featuring cascading petal shell stitches and scalloped hem

This Blush Petal Lace Dress delivers exactly that. It’s an A-line silhouette with gorgeous shell lace, designed to be worn over a matching opaque slip for that perfect balance of delicate and practical. The dusty blush color, the petal-shaped fans, the gentle flare from waist to hem. It all adds up to something genuinely special.

Whether you’re making it for a garden party, a summer wedding, or just because you deserve something beautiful on your hook, this pattern gives you everything you need. Three sizes, clear stitch counts, and a construction method that breaks the dress into manageable panels. Let’s dive in.

About This Blush Petal Lace Dress Design

This crochet dress pattern creates a knee-length garment with elbow-length sleeves and a flattering A-line shape. The star of the show is the alternating shell lace pattern, which creates those beautiful petal-like fans you see cascading down the fabric.

The construction is clever and approachable. You’ll work flat panels for the front bodice, back bodice, front skirt, and back skirt, then seam them together. The sleeves are worked separately and set in. A side zipper on the left and a hook-and-eye closure at the back keyhole opening make dressing easy.

Sizes available: S, M, and L

MeasurementSML
Body bust to fit78–80 cm87–89 cm96–98 cm
Finished bust82 cm91 cm100 cm
Finished waist73 cm82 cm91 cm
Finished hem109 cm118 cm127 cm

The shoulder-to-hem length is approximately 87 cm (34.3 inches) before the trim is added. Choose your size based on both bust and waist measurements. The pattern also recommends checking the skirt against your hips, roughly 18–22 cm below the waist.

Skill Level

This pattern is best suited for intermediate crocheters who are comfortable with:

  • Working flat and turning each row
  • Basic increases and decreases
  • Reading stitch counts for multiple sizes
  • Seaming garment pieces together
  • Installing a zipper (or willingness to learn)

If you’ve made a few garments before or feel confident following detailed row-by-row instructions, you’ll do great here. The shell lace pattern itself is rhythmic and repetitive once you get the hang of it.

Materials You’ll Need

Yarn

Color A: Blush smooth sport weight cotton or cotton-linen blend

SizeYards NeededMeters Needed
S1075 yd983 m
M1200 yd1097 m
L1350 yd1234 m

Buy all your yarn from the same dye lot. These amounts include a swatching allowance and are estimates.

Hook

3.5 mm (US E/4) or size needed to achieve gauge

Additional Supplies

  • An opaque slip in a matching tone
  • Stitch markers
  • Tapestry needle
  • Tape measure
  • Rustproof pins
  • Matching thread
  • Small sew-on hook-and-eye for the upper back opening
  • 25 cm (10 inch) lightweight nylon coil zipper for the left side seam
  • Blocking mat and pins

Gauge

18 stitches and 8 rows = 10 × 10 cm (4 × 4 inches) after washing and drying flat.

To check your gauge, chain 28 and work 26 double crochet (dc) stitches. Then work at least 12 rows. Measure the shell ground rows and four complete two-row repeats inside the edges, using the same fabric weight you plan to wear.

After the first dc row, alternate Shell A and Shell B. Each repeat should measure about 4.4 cm (1.75 inches) wide and 2.5 cm (1 inch) tall. Count 8 foundation positions per repeat.

Important: Change your hook size if needed. Hang the dry swatch for 30 minutes and remeasure before choosing a skirt length. Keep the published stitch counts and add or subtract straight rows for length adjustments.

Abbreviations and Special Stitches

Let’s define every stitch and abbreviation you’ll encounter:

  • ch = chain
  • dc = double crochet (yarn over, insert hook, pull up loop, yarn over and pull through 2 loops twice)
  • hdc = half double crochet
  • sc = single crochet (insert hook, pull up loop, yarn over and pull through both loops)
  • sl st = slip stitch (insert hook, pull up loop and through loop on hook in one motion)
  • st(s) = stitch(es)
  • sp = space
  • RS = right side
  • WS = wrong side

Special Stitches

dc2tog (double crochet two together): This is a decrease stitch. Begin a dc in each of the next two stitches, keeping the final loop of each on the hook. You’ll have 3 loops on your hook. Yarn over and draw through all three loops. This turns 2 stitches into 1.

Fan: Work 7 dc in one stitch. The center dc is stitch 4 of the fan. This creates the beautiful petal shape in the lace.

Shell A: This creates the openwork. Dc in first st, then repeat [ch 2, skip 3 sts, fan in next st, ch 2, skip 3 sts, sc in next st] across. Dc in last st.

Shell B: This restores the eight base positions per repeat. Dc in first edge st. Working in the direction you encounter them, make 3 dc in each ch-2 sp, 1 dc in the center dc of each fan, and 1 dc in each sc. Dc in last edge st.

Pattern Notes

Before you begin, here are some essential notes:

  • All size counts are written as S / M / L throughout the pattern
  • Work flat and turn each row
  • Chain 2 (ch 2) at the start of dc rows
  • Chain 1 (ch 1) at the start of sc rows
  • Turning chains and slip joins never count as stitches
  • The first body row is the RS (right side)
  • At row starts, work the first stitch in the first available stitch unless a shaping instruction says otherwise

For 8 evenly spaced increases: Divide the old stitch count into eight consecutive groups, with group sizes differing by at most one. Work 2 dc in the last stitch of each group and 1 dc in the remaining stitches.

Construction Overview

The dress is built in sections:

  1. Work the front bodice from waist to shoulders
  2. Work the back bodice from waist to shoulders
  3. Work the front skirt from waist to hem
  4. Work the back skirt from waist to hem
  5. Make two sleeves
  6. Join shoulder, side, and waist seams
  7. Set in sleeves
  8. Add edgings and closures

Keep your right sides identifiable throughout. Mark them with stitch markers or scrap yarn.

Instructions

Front and Back Bodice

Make two panels alike through Row 24. Mark the right side and the waist edge of each panel. Use Color A.

Row 1: Ch (68 / 76 / 84). Dc in third ch from hook and across. (66 / 74 / 82) sts

Row 2: Increase 8 evenly. (74 / 82 / 90) dc

Rows 3–14: Alternate Shell A and Shell B six times. (74 / 82 / 90) dc after Row 14

Row 15: With RS facing, join yarn in the fifth stitch. Work across, leaving the last four stitches unworked. Fasten the previous row end before joining. (66 / 74 / 82) sts

Rows 16–23: Work Shell A and Shell B four times over the new width. After Row 23. (66 / 74 / 82) dc

Row 24: Dc across. (66 / 74 / 82) dc

Front Shoulders

Row 25: Work the first (22 / 24 / 26) sts and leave the rest unworked. With RS facing, rejoin for the second shoulder and work the last (22 / 24 / 26) sts. Leave the center (22 / 26 / 30) sts open.

Work each shoulder independently. Keep the armhole edge straight. At the neck edge, leave the necessary stitches unworked at the end of an inward row, or sl st over those stitches before the turning chain at the start of an outward row.

Resulting stitch counts:

RowSML
26192123
27171921
28161820
29161820
30161820

Fasten off each shoulder after Row 30.

Back Shoulders and Keyhole

Rows 25–28: Work each half separately over (33 / 37 / 41) sts per row. At Row 25 rejoin at the center for the second half. Leave the center edges unjoined to form the opening.

Rows 29–30: With RS facing, rejoin at the first of the outermost (16 / 18 / 20) sts of each half and work only that width for two rows. Leave the inner stitches unworked. Fasten off. (16 / 18 / 20) sts per shoulder

Tip: At the end of an armhole or neck shaping row, place a marker in the last worked stitch. Use these markers to line up your seams later.

Front and Back Skirt

Make two panels. Mark the RS and the top edge before beginning the second panel. Use Color A. Work increases on both panels.

Row 1: Ch (68 / 76 / 84). Dc in third ch from hook and across. (66 / 74 / 82) sts

Rows 2–39: Work Shell A on even rows and Shell B on odd rows. On the four increase rows, first make the normal Shell B stitches, adding one extra dc at each of eight selected placements.

For each increase row, count the base Shell B dc as if there were no increases. Divide that baseline count into eight consecutive groups of nearly equal size. Work an extra dc in the same sp or st as the final baseline dc of each group.

Increase rows and resulting stitch counts:

Increase RowSML
5748290
7829098
219098106
3798106114

Final Row 39: Shell B without increases. (98 / 106 / 114) dc

Length adjustments: For a longer skirt, add complete Shell A/B pairs after the final increase. For a shorter skirt, remove full pairs, keeping the increase rows evenly spaced.

Before seaming, each skirt panel should measure about 49 cm (19.3 inches) from waist to hem and end with (98 / 106 / 114) sts.

Sleeves

Make two. The first row forms the sleeve top. Work toward the cuff and keep the center of the top edge marked for the shoulder seam.

Row 1: Ch (76 / 84 / 92). Dc in third ch from hook and across. (74 / 82 / 90) sts

Rows 2–19: Alternate Shell A on even rows and Shell B on odd rows. (74 / 82 / 90) dc after the last Shell B

Row 20: Dc across, replacing each of 8 evenly spaced nonoverlapping pairs with dc2tog. (66 / 74 / 82) sts

Space the pairs by splitting the available stitches into eight groups of nearly equal size and working dc2tog over the last two stitches of each group.

Tip: Pin the sleeve top into the basted armhole before attaching. Match the marked center to the shoulder. Adjust the sleeve foundation if your fabric needs more ease. Goal length: 25 cm (9.8 inches).

Assembly

Seaming

You’ll need Color A, tapestry needle, and 3.5 mm (US E/4) hook for optional slip-stitch joins.

Join 1: With RS together, whipstitch each front shoulder to the corresponding back shoulder. (16 / 18 / 20) joined pairs each

Join 2: On the right side of the dress, seam all 39 skirt row pairs and 14 bodice row pairs. On the left, leave the first 9 skirt rows and first 10 bodice rows from the waist open for the zipper. 30 skirt row pairs and 4 bodice row pairs seamed on the left

Join 3: Join skirt and bodice waist edges RS together. At the zipper opening, secure the seam ends separately. (132 / 148 / 164) joined waist pairs

Join 4: Close each sleeve side seam from its cuff to its top. 20 row pairs per sleeve

Join 5: Match each sleeve seam to the underarm and the marked top center to the shoulder. Distribute the stitches around the opening. (74 / 82 / 90) sleeve positions per armhole

Checkpoint: Waist stitches match one for one. Side seams are even and the neckline opens at center back. Try on over your intended underlayer.

Side Zipper Installation

You’ll need a 25 cm (10 inch) nylon coil zipper, matching thread, and a sewing needle.

Baste 1: Align the zipper teeth between the two open edges. Match the waist seam on both sides. Tip the zipper tape toward the WS and baste it in position. 2 lines of basting

Seam 2: Backstitch the tape to each edge without catching the teeth. Anchor the tape ends, remove basting, and close the zipper. 2 permanent lines of stitching

Checkpoint: The zipper runs smoothly and the waist seam aligns across both sides. If your closed zipper length differs from the opening, adjust the end of the left skirt seam before sewing.

Edgings and Details

Neckline and Back Opening

You’ll need Color A, 3.5 mm (US E/4) hook, hook-and-eye, and matching thread.

Row 1: Start at the upper edge of one side of the back opening. Sc evenly along the back neck, across both shoulder joins and around the front neck to the opposite side of the opening. (84 / 92 / 100) sc

Row 2: Turn. Sl st loosely in each sc. Same count as Row 1

Closure: Sew one hook and one eye, opposite each other at the top of the back opening. 2 hardware pieces

Checkpoint: Opening edges meet without overlapping and the neck lies flat. Adjust the pickup density evenly before fastening off if needed.

Hem and Cuffs

You’ll need Color A, 3.5 mm (US E/4) hook, and a marker for the join.

Round 1: Join at a side seam and work one sc per hem stitch. (196 / 212 / 228) sc

Round 2: Repeat [sl st, skip 1, 5 dc in next st, skip 1] around, then join. (49 / 53 / 57) scallops

Cuff Round 1: Pick up 1 sc in each cuff stitch and join. (66 / 74 / 82) sc per sleeve

Cuff Round 2: Work the same 4-st repeat as the hem. Use the final 2 stitches to slip stitch back to the join. (16 / 18 / 20) scallops per cuff

Checkpoint: Edging lies flat without a drawstring effect. If it curls or cups, redo it with a slightly larger hook.

Finishing

Weaving Ends and Blocking

You’ll need matching yarn tails, 3.5 mm (US E/4) hook if needed to pull a tail through, plus tapestry needle, blocking mat, and pins.

Finish 1: Weave every tail back and forth through matching stitches. Tuck hook-and-eye sewing ends on the WS.

Finish 2: Wash or wet-block as directed on the yarn label. Roll in a towel, ease to the published measurements, and dry completely flat.

Checkpoint: Check bust, waist, hem, shoulder-to-hem length, and that both sleeves are even. Make any seam adjustments after drying.

Care Instructions

Follow your yarn label for specific care. For washable cotton blends, wash gently in cool water and dry flat. Store folded to help keep the skirt from growing over time.

Keep detachable hardware away from young children and pets. Inspect the closure and any tacked points before each wear.

Important: Wear a matching opaque slip, and check the coverage and stretch in daylight before heading out. The lace is beautiful, and an underlayer ensures you’re comfortable and confident.

Tips for Success

Choose your size carefully. This pattern asks you to consider both bust and waist measurements. Take accurate measurements over well-fitting undergarments.

Swatch seriously. For a garment like this, gauge matters. The drape and fit depend on your tension matching the pattern. Hang your swatch before measuring.

Mark everything. RS, WS, waist edges, shoulder centers. The more you mark, the easier assembly becomes.

Baste before final seaming. The pattern specifically recommends basting and trying on before you commit to permanent seams. This is wise advice for any fitted garment.

Take your time with the zipper. If you’ve never installed a zipper in crochet before, watch a tutorial first. Baste carefully, check alignment, and sew slowly.

Who Will Love This Pattern

This blush petal lace dress makes a stunning piece for:

  • Spring and summer events like garden parties, bridal showers, or outdoor weddings
  • Mother of the bride or groom looking for something handmade and meaningful
  • Anniversary celebrations or romantic dinners
  • Anyone who appreciates vintage-inspired elegance with a modern construction approach

The shell lace pattern creates a timeless look that photographs beautifully. The blush color flatters a wide range of skin tones and pairs well with nude heels, delicate jewelry, and soft waves.

Handmade blush cotton crochet dress with openwork lace bodice and flared skirt in sport weight yarn

Final Thoughts

This Blush Petal Lace Dress crochet pattern is a labor of love. It’s not a quick weekend project, but the result is a wearable piece of art. The alternating shell lace creates rhythm in your work, the construction is logical and well-planned, and the finished dress has that undeniable wow factor.

Take your time, trust the process, and enjoy watching those beautiful petal fans emerge row by row. This is the kind of project that reminds you why you fell in love with crochet in the first place.

Thank you so much for choosing this pattern. If you make this dress, I would absolutely love to see it. Share your photos on Instagram or Facebook and tag us. Seeing your creations is the best part.

If this pattern is calling your name, go ahead and save it to your Pinterest boards so you can find it when you’re ready to start. And if you do make it, drop a comment below. I’d love to hear how it goes and see what color you chose!

You Might Also Like

Leave a Comment

Your email address will not be published. Required fields are marked *

*